Scott Elliott Fahlman (born March 21, 1948) is an American computer scientist and Professor Emeritus at Carnegie Mellon University's Language Technologies Institute and Computer Science Department. He is notable for early work on automated planning and scheduling in a blocks world, on semantic networks, on neural networks (especially the cascade correlation algorithm), on the programming languages Dylan, and Common Lisp (especially CMU Common Lisp), and he was one of the founders of Lucid Inc. During the period when it was standardized, he was recognized as "the leader of Common Lisp." From 2006 to 2015, Fahlman was engaged in developing a knowledge base named Scone, based in part on his thesis work on the NETL Semantic Network. He also is credited with coining the use of the emoticon. == Life and career == Fahlman was born in Medina, Ohio, the son of Lorna May (Dean) and John Emil Fahlman. He attended the Massachusetts Institute of Technology (MIT), where he received a Bachelor of Science (B.S.) and Master of Science (M.S.) degree in electrical engineering and computer science in 1973, and a Doctor of Philosophy (Ph.D.) in artificial intelligence in 1977. He has noted that his doctoral diploma says the degree was awarded for "original research as demonstrated by a thesis in the field of Artificial Intelligence" and suggested that it may be the first doctorate to use that term. He is a fellow of the American Association for Artificial Intelligence. Fahlman acted as thesis advisor for Donald Cohen, David B. McDonald, David S. Touretzky, Skef Wholey, Justin Boyan, Michael Witbrock, and Alicia Tribble Sagae. From May 1996 to July 2001, Fahlman directed the Justsystem Pittsburgh Research Center. === Boltzmann Machine (1983) === In 1983, Fahlman, Geoffrey Hinton, and Terry Sejnowski published a paper in Proceedings of the AAAI-83 Conference, Washington DC, August 1983. The paper was titled as "Massively Parallel Architectures for AI: NETL, Thistle and Boltzmann Machines". === Emoticons === Fahlman was not the first to suggest the concept of the emoticon – a similar concept for a marker appeared in an article of Reader's Digest in May 1967, although that idea was never put into practice. In an interview printed in The New York Times in 1969, Vladimir Nabokov noted: "I often think there should exist a special typographical sign for a smile – some sort of concave mark, a supine round bracket." Fahlman is credited with originating the first smiley emoticon, which he thought would help people on a message board at Carnegie Mellon to distinguish serious posts from jokes. He proposed the use of :-) and :-( for this purpose, and the symbols caught on. The original message from which these symbols originated was posted on 19 September 1982. The message was recovered by Jeff Baird on 10 September 2002 and read: 19-Sep-82 11:44 Scott E Fahlman :-) From: Scott E Fahlman
JAX (software)
JAX is a Python library for accelerator-oriented array computation and program transformation, designed for high-performance numerical computing and large-scale machine learning. It is developed by Google with contributions from Nvidia and other community contributors. It is described as bringing together a modified version of the automatic differentiation system autograd and OpenXLA's XLA (Accelerated Linear Algebra). It is designed to follow the structure and workflow of NumPy as closely as possible and works with various existing frameworks such as TensorFlow and PyTorch. The primary features of JAX are: Providing a unified NumPy-like interface to computations that run on CPU, GPU, or TPU, in local or distributed settings. Built-in Just-In-Time (JIT) compilation via OpenXLA, an open-source machine learning compiler ecosystem. Efficient evaluation of gradients via its automatic differentiation transformations. Automatic vectorization to efficiently map functions over arrays representing batches of inputs. == Libraries using Jax == Flax Equinox Optax
Multispectral pattern recognition
Multispectral remote sensing is the collection and analysis of reflected, emitted, or back-scattered energy from an object or an area of interest in multiple bands of regions of the electromagnetic spectrum (Jensen, 2005). Subcategories of multispectral remote sensing include hyperspectral, in which hundreds of bands are collected and analyzed, and ultraspectral remote sensing where many hundreds of bands are used (Logicon, 1997). The main purpose of multispectral imaging is the potential to classify the image using multispectral classification. This is a much faster method of image analysis than is possible by human interpretation. == Multispectral remote sensing systems == Remote sensing systems gather data via instruments typically carried on satellites in orbit around the Earth. The remote sensing scanner detects the energy that radiates from the object or area of interest. This energy is recorded as an analog electrical signal and converted into a digital value though an A-to-D conversion. There are several multispectral remote sensing systems that can be categorized in the following way: === Multispectral imaging using discrete detectors and scanning mirrors === Landsat Multispectral Scanner (MSS) Landsat Thematic Mapper (TM) NOAA Geostationary Operational Environmental Satellite (GOES) NOAA Advanced Very High Resolution Radiometer (AVHRR) NASA and ORBIMAGE, Inc., Sea-viewing Wide field-of-view Sensor (SeaWiFS) Daedalus, Inc., Aircraft Multispectral Scanner (AMS) NASA Airborne Terrestrial Applications Sensor (ATLAS) === Multispectral imaging using linear arrays === SPOT 1, 2, and 3 High Resolution Visible (HRV) sensors and Spot 4 and 5 High Resolution Visible Infrared (HRVIR) and vegetation sensor Indian Remote Sensing System (IRS) Linear Imaging Self-scanning Sensor (LISS) Space Imaging, Inc. (IKONOS) Digital Globe, Inc. (QuickBird) ORBIMAGE, Inc. (OrbView-3) ImageSat International, Inc. (EROS A1) NASA Terra Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) NASA Terra Multiangle Imaging Spectroradiometer (MISR) === Imaging spectrometry using linear and area arrays === NASA Jet Propulsion Laboratory Airborne Visible/Infrared Imaging Spectrometer (AVIRIS) Compact Airborne Spectrographic Imager 3 (CASI 3) NASA Terra Moderate Resolution Imaging Spectrometer (MODIS) NASA Earth Observer (EO-1) Advanced Land Imager (ALI), Hyperion, and LEISA Atmospheric Corrector (LAC) === Satellite analog and digital photographic systems === Russian SPIN-2 TK-350, and KVR-1000 NASA Space Shuttle and International Space Station Imagery == Multispectral classification methods == A variety of methods can be used for the multispectral classification of images: Algorithms based on parametric and nonparametric statistics that use ratio-and interval-scaled data and nonmetric methods that can also incorporate nominal scale data (Duda et al., 2001), Supervised or unsupervised classification logic, Hard or soft (fuzzy) set classification logic to create hard or fuzzy thematic output products, Per-pixel or object-oriented classification logic, and Hybrid approaches == Supervised classification == In this classification method, the identity and location of some of the land-cover types are obtained beforehand from a combination of fieldwork, interpretation of aerial photography, map analysis, and personal experience. The analyst would locate sites that have similar characteristics to the known land-cover types. These areas are known as training sites because the known characteristics of these sites are used to train the classification algorithm for eventual land-cover mapping of the remainder of the image. Multivariate statistical parameters (means, standard deviations, covariance matrices, correlation matrices, etc.) are calculated for each training site. All pixels inside and outside of the training sites are evaluated and allocated to the class with the more similar characteristics. === Classification scheme === The first step in the supervised classification method is to identify the land-cover and land-use classes to be used. Land-cover refers to the type of material present on the site (e.g. water, crops, forest, wet land, asphalt, and concrete). Land-use refers to the modifications made by people to the land cover (e.g. agriculture, commerce, settlement). All classes should be selected and defined carefully to properly classify remotely sensed data into the correct land-use and/or land-cover information. To achieve this purpose, it is necessary to use a classification system that contains taxonomically correct definitions of classes. If a hard classification is desired, the following classes should be used: Mutually exclusive: there is not any taxonomic overlap of any classes (i.e., rain forest and evergreen forest are distinct classes). Exhaustive: all land-covers in the area have been included. Hierarchical: sub-level classes (e.g., single-family residential, multiple-family residential) are created, allowing that these classes can be included in a higher category (e.g., residential). Some examples of hard classification schemes are: American Planning Association Land-Based Classification System United States Geological Survey Land-use/Land-cover Classification System for Use with Remote Sensor Data U.S. Department of the Interior Fish and Wildlife Service U.S. National Vegetation and Classification System International Geosphere-Biosphere Program IGBP Land Cover Classification System === Training sites === Once the classification scheme is adopted, the image analyst may select training sites in the image that are representative of the land-cover or land-use of interest. If the environment where the data was collected is relatively homogeneous, the training data can be used. If different conditions are found in the site, it would not be possible to extend the remote sensing training data to the site. To solve this problem, a geographical stratification should be done during the preliminary stages of the project. All differences should be recorded (e.g. soil type, water turbidity, crop species, etc.). These differences should be recorded on the imagery and the selection training sites made based on the geographical stratification of this data. The final classification map would be a composite of the individual stratum classifications. After the data are organized in different training sites, a measurement vector is created. This vector would contain the brightness values for each pixel in each band in each training class. The mean, standard deviation, variance-covariance matrix, and correlation matrix are calculated from the measurement vectors. Once the statistics from each training site are determined, the most effective bands for each class should be selected. The objective of this discrimination is to eliminate the bands that can provide redundant information. Graphical and statistical methods can be used to achieve this objective. Some of the graphic methods are: Bar graph spectral plots Cospectral mean vector plots Feature space plots Cospectral parallelepiped or ellipse plots === Classification algorithm === The last step in supervised classification is selecting an appropriate algorithm. The choice of a specific algorithm depends on the input data and the desired output. Parametric algorithms are based on the fact that the data is normally distributed. If the data is not normally distributed, nonparametric algorithms should be used. The more common nonparametric algorithms are: One-dimensional density slicing Parallelipiped Minimum distance Nearest-neighbor Expert system analysis Convolutional neural network == Unsupervised classification == Unsupervised classification (also known as clustering) is a method of partitioning remote sensor image data in multispectral feature space and extracting land-cover information. Unsupervised classification require less input information from the analyst compared to supervised classification because clustering does not require training data. This process consists in a series of numerical operations to search for the spectral properties of pixels. From this process, a map with m spectral classes is obtained. Using the map, the analyst tries to assign or transform the spectral classes into thematic information of interest (i.e. forest, agriculture, urban). This process may not be easy because some spectral clusters represent mixed classes of surface materials and may not be useful. The analyst has to understand the spectral characteristics of the terrain to be able to label clusters as a specific information class. There are hundreds of clustering algorithms. Two of the most conceptually simple algorithms are the chain method and the ISODATA method. === Chain method === The algorithm used in this method operates in a two-pass mode (it passes through the multispectral dataset two times. In the first pass, the program reads through the dataset and sequentially builds clusters (groups of p
Optical character recognition
Optical character recognition (OCR) or optical character reader is the electronic or mechanical conversion of images of typed, handwritten or printed text into machine-encoded text, whether from a scanned document, a photo of a document, a scene photo (for example the text on signs and billboards in a landscape photo) or from subtitle text superimposed on an image (for example: from a television broadcast). Widely used as a form of data entry from printed paper data records – whether passport documents, invoices, bank statements, computerized receipts, business cards, mail, printed data, or any suitable documentation – it is a common method of digitizing printed texts so that they can be electronically edited, searched, stored more compactly, displayed online, and used in machine processes such as cognitive computing, machine translation, (extracted) text-to-speech, key data and text mining. OCR is a field of research in pattern recognition, artificial intelligence and computer vision. Early versions needed to be trained with images of each character, and worked on one font at a time. Advanced systems capable of producing a high degree of accuracy for most fonts are now common, and with support for a variety of image file format inputs. Some systems are capable of reproducing formatted output that closely approximates the original page including images, columns, and other non-textual components. == History == Early optical character recognition may be traced to technologies involving telegraphy and creating reading devices for the blind. In 1914, Emanuel Goldberg developed a machine that read characters and converted them into standard telegraph code. Concurrently, Edmund Fournier d'Albe developed the Optophone, a handheld scanner that when moved across a printed page, produced tones that corresponded to specific letters or characters. In the late 1920s and into the 1930s, Emanuel Goldberg developed what he called a "Statistical Machine" for searching microfilm archives using an optical code recognition system. In 1931, he was granted US Patent number 1,838,389 for the invention. The patent was acquired by IBM. === Visually impaired users === In 1974, Ray Kurzweil started the company Kurzweil Computer Products, Inc. and continued development of omni-font OCR, which could recognize text printed in virtually any font. (Kurzweil is often credited with inventing omni-font OCR, but it was in use by companies, including CompuScan, in the late 1960s and 1970s.) Kurzweil used the technology to create a reading machine for blind people to have a computer read text to them out loud. The device included a CCD-type flatbed scanner and a text-to-speech synthesizer. On January 13, 1976, the finished product was unveiled during a widely reported news conference headed by Kurzweil and the leaders of the National Federation of the Blind. In 1978, Kurzweil Computer Products began selling a commercial version of the optical character recognition computer program. LexisNexis was one of the first customers, and bought the program to upload legal paper and news documents onto its nascent online databases. Two years later, Kurzweil sold his company to Xerox, which eventually spun it off as Scansoft, which merged with Nuance Communications. In the 2000s, OCR was made available online as a service (WebOCR), in a cloud computing environment, and in mobile applications like real-time translation of foreign-language signs on a smartphone. With the advent of smartphones and smartglasses, OCR can be used in internet connected mobile device applications that extract text captured using the device's camera. These devices that do not have built-in OCR functionality will typically use an OCR API to extract the text from the image file captured by the device. The OCR API returns the extracted text, along with information about the location of the detected text in the original image back to the device app for further processing (such as text-to-speech) or display. Various commercial and open source OCR systems are available for most common writing systems, including Latin, Cyrillic, Arabic, Hebrew, Indic, Bengali (Bangla), Devanagari, Tamil, Chinese, Japanese, and Korean characters. == Applications == OCR engines have been developed into software applications specializing in various subjects such as receipts, invoices, checks, and legal billing documents. The software can be used for: Entering data for business documents, e.g. checks, passports, invoices, bank statements and receipts Automatic number-plate recognition Passport recognition and information extraction in airports Automatically extracting key information from insurance documents Traffic-sign recognition Extracting business card information into a contact list Creating textual versions of printed documents, e.g. book scanning for Project Gutenberg Making electronic images of printed documents searchable, e.g. Google Books Converting handwriting in real-time to control a computer (pen computing) Defeating or testing the robustness of CAPTCHA anti-bot systems, though these are specifically designed to prevent OCR. Assistive technology for blind and visually impaired users Writing instructions for vehicles by identifying CAD images in a database that are appropriate to the vehicle design as it changes in real time Making scanned documents searchable by converting them to PDFs == Types == Optical character recognition (OCR) – targets typewritten text, one glyph or character at a time. Optical word recognition – targets typewritten text, one word at a time (for languages that use a space as a word divider). Usually just called "OCR". Intelligent character recognition (ICR) – also targets handwritten printscript or cursive text one glyph or character at a time, usually involving machine learning. Intelligent word recognition (IWR) – also targets handwritten printscript or cursive text, one word at a time. This is especially useful for languages where glyphs are not separated in cursive script. OCR is generally an offline process, which analyses a static document. There are cloud based services which provide an online OCR API service. Handwriting movement analysis can be used as input to handwriting recognition. Instead of merely using the shapes of glyphs and words, this technique is able to capture motion, such as the order in which segments are drawn, the direction, and the pattern of putting the pen down and lifting it. This additional information can make the process more accurate. This technology is also known as "online character recognition", "dynamic character recognition", "real-time character recognition", and "intelligent character recognition". == Techniques == === Pre-processing === OCR software often pre-processes images to improve the chances of successful recognition. Techniques include: De-skewing – if the document was not aligned properly when scanned, it may need to be tilted a few degrees clockwise or counterclockwise in order to make lines of text perfectly horizontal or vertical. Despeckling – removal of positive and negative spots, smoothing edges Binarization – conversion of an image from color or greyscale to black-and-white (called a binary image because there are two colors). The task is performed as a simple way of separating the text (or any other desired image component) from the background. The task of binarization is necessary since most commercial recognition algorithms work only on binary images, as it is simpler to do so. In addition, the effectiveness of binarization influences to a significant extent the quality of character recognition, and careful decisions are made in the choice of the binarization employed for a given input image type; since the quality of the method used to obtain the binary result depends on the type of image (scanned document, scene text image, degraded historical document, etc.). Line removal – Cleaning up non-glyph boxes and lines Layout analysis or zoning – Identification of columns, paragraphs, captions, etc. as distinct blocks. Especially important in multi-column layouts and tables. Line and word detection – Establishment of a baseline for word and character shapes, separating words as necessary. Script recognition – In multilingual documents, the script may change at the level of the words and hence, identification of the script is necessary, before the right OCR can be invoked to handle the specific script. Character isolation or segmentation – For per-character OCR, multiple characters that are connected due to image artifacts must be separated; single characters that are broken into multiple pieces due to artifacts must be connected. Normalization of aspect ratio and scale Segmentation of fixed-pitch fonts is accomplished relatively simply by aligning the image to a uniform grid based on where vertical grid lines will least often intersect black areas. For proportional fonts, more sophisticated techniques are needed because whitespace bet
Characteristic samples
Characteristic samples is a concept in the field of grammatical inference, related to passive learning. In passive learning, an inference algorithm I {\displaystyle I} is given a set of pairs of strings and labels S {\displaystyle S} , and returns a representation R {\displaystyle R} that is consistent with S {\displaystyle S} . Characteristic samples consider the scenario when the goal is not only finding a representation consistent with S {\displaystyle S} , but finding a representation that recognizes a specific target language. A characteristic sample of language L {\displaystyle L} is a set of pairs of the form ( s , l ( s ) ) {\displaystyle (s,l(s))} where: l ( s ) = 1 {\displaystyle l(s)=1} if and only if s ∈ L {\displaystyle s\in L} l ( s ) = − 1 {\displaystyle l(s)=-1} if and only if s ∉ L {\displaystyle s\notin L} Given the characteristic sample S {\displaystyle S} , I {\displaystyle I} 's output on it is a representation R {\displaystyle R} , e.g. an automaton, that recognizes L {\displaystyle L} . == Formal Definition == === The Learning Paradigm associated with Characteristic Samples === There are three entities in the learning paradigm connected to characteristic samples, the adversary, the teacher and the inference algorithm. Given a class of languages C {\displaystyle \mathbb {C} } and a class of representations for the languages R {\displaystyle \mathbb {R} } , the paradigm goes as follows: The adversary A {\displaystyle A} selects a language L ∈ C {\displaystyle L\in \mathbb {C} } and reports it to the teacher The teacher T {\displaystyle T} then computes a set of strings and label them correctly according to L {\displaystyle L} , trying to make sure that the inference algorithm will compute L {\displaystyle L} The adversary can add correctly labeled words to the set in order to confuse the inference algorithm The inference algorithm I {\displaystyle I} gets the sample and computes a representation R ∈ R {\displaystyle R\in \mathbb {R} } consistent with the sample. The goal is that when the inference algorithm receives a characteristic sample for a language L {\displaystyle L} , or a sample that subsumes a characteristic sample for L {\displaystyle L} , it will return a representation that recognizes exactly the language L {\displaystyle L} . === Sample === Sample S {\displaystyle S} is a set of pairs of the form ( s , l ( s ) ) {\displaystyle (s,l(s))} such that l ( s ) ∈ { − 1 , 1 } {\displaystyle l(s)\in \{-1,1\}} ==== Sample consistent with a language ==== We say that a sample S {\displaystyle S} is consistent with language L {\displaystyle L} if for every pair ( s , l ( s ) ) {\displaystyle (s,l(s))} in S {\displaystyle S} : l ( s ) = 1 if and only if s ∈ L {\displaystyle l(s)=1{\text{ if and only if }}s\in L} l ( s ) = − 1 if and only if s ∉ L {\displaystyle l(s)=-1{\text{ if and only if }}s\notin L} === Characteristic sample === Given an inference algorithm I {\displaystyle I} and a language L {\displaystyle L} , a sample S {\displaystyle S} that is consistent with L {\displaystyle L} is called a characteristic sample of L {\displaystyle L} for I {\displaystyle I} if: I {\displaystyle I} 's output on S {\displaystyle S} is a representation R {\displaystyle R} that recognizes L {\displaystyle L} . For every sample D {\displaystyle D} that is consistent with L {\displaystyle L} and also fulfils S ⊆ D {\displaystyle S\subseteq D} , I {\displaystyle I} 's output on D {\displaystyle D} is a representation R {\displaystyle R} that recognizes L {\displaystyle L} . A Class of languages C {\displaystyle \mathbb {C} } is said to have charistaristic samples if every L ∈ C {\displaystyle L\in \mathbb {C} } has a characteristic sample. == Related Theorems == === Theorem === If equivalence is undecidable for a class C {\textstyle \mathbb {C} } over Σ {\textstyle \Sigma } of cardinality bigger than 1, then C {\textstyle \mathbb {C} } doesn't have characteristic samples. ==== Proof ==== Given a class of representations C {\textstyle \mathbb {C} } such that equivalence is undecidable, for every polynomial p ( x ) {\displaystyle p(x)} and every n ∈ N {\displaystyle n\in \mathbb {N} } , there exist two representations r 1 {\displaystyle r_{1}} and r 2 {\displaystyle r_{2}} of sizes bounded by n {\displaystyle n} , that recognize different languages but are inseparable by any string of size bounded by p ( n ) {\displaystyle p(n)} . Assuming this is not the case, we can decide if r 1 {\displaystyle r_{1}} and r 2 {\displaystyle r_{2}} are equivalent by simulating their run on all strings of size smaller than p ( n ) {\displaystyle p(n)} , contradicting the assumption that equivalence is undecidable. === Theorem === If S 1 {\displaystyle S_{1}} is a characteristic sample for L 1 {\displaystyle L_{1}} and is also consistent with L 2 {\displaystyle L_{2}} , then every characteristic sample of L 2 {\displaystyle L_{2}} , is inconsistent with L 1 {\displaystyle L_{1}} . ==== Proof ==== Given a class C {\textstyle \mathbb {C} } that has characteristic samples, let R 1 {\displaystyle R_{1}} and R 2 {\displaystyle R_{2}} be representations that recognize L 1 {\displaystyle L_{1}} and L 2 {\displaystyle L_{2}} respectively. Under the assumption that there is a characteristic sample for L 1 {\displaystyle L_{1}} , S 1 {\displaystyle S_{1}} that is also consistent with L 2 {\displaystyle L_{2}} , we'll assume falsely that there exist a characteristic sample for L 2 {\displaystyle L_{2}} , S 2 {\displaystyle S_{2}} that is consistent with L 1 {\displaystyle L_{1}} . By the definition of characteristic sample, the inference algorithm I {\displaystyle I} must return a representation which recognizes the language if given a sample that subsumes the characteristic sample itself. But for the sample S 1 ∪ S 2 {\displaystyle S_{1}\cup S_{2}} , the answer of the inferring algorithm needs to recognize both L 1 {\displaystyle L_{1}} and L 2 {\displaystyle L_{2}} , in contradiction. === Theorem === If a class is polynomially learnable by example based queries, it is learnable with characteristic samples. == Polynomialy characterizable classes == === Regular languages === The proof that DFA's are learnable using characteristic samples, relies on the fact that every regular language has a finite number of equivalence classes with respect to the right congruence relation, ∼ L {\displaystyle \sim _{L}} (where x ∼ L y {\displaystyle x\sim _{L}y} for x , y ∈ Σ ∗ {\displaystyle x,y\in \Sigma ^{}} if and only if ∀ z ∈ Σ ∗ : x z ∈ L ↔ y z ∈ L {\displaystyle \forall z\in \Sigma ^{}:xz\in L\leftrightarrow yz\in L} ). Note that if x {\displaystyle x} , y {\displaystyle y} are not congruent with respect to ∼ L {\displaystyle \sim _{L}} , there exists a string z {\displaystyle z} such that x z ∈ L {\displaystyle xz\in L} but y z ∉ L {\displaystyle yz\notin L} or vice versa, this string is called a separating suffix. ==== Constructing a characteristic sample ==== The construction of a characteristic sample for a language L {\displaystyle L} by the teacher goes as follows. Firstly, by running a depth first search on a deterministic automaton A {\displaystyle A} recognizing L {\displaystyle L} , starting from its initial state, we get a suffix closed set of words, W {\displaystyle W} , ordered in shortlex order. From the fact above, we know that for every two states in the automaton, there exists a separating suffix that separates between every two strings that the run of A {\displaystyle A} on them ends in the respective states. We refer to the set of separating suffixes as S {\displaystyle S} . The labeled set (sample) of words the teacher gives the adversary is { ( w , l ( w ) ) | w ∈ W ⋅ S ∪ W ⋅ Σ ⋅ S } {\displaystyle \{(w,l(w))|w\in W\cdot S\cup W\cdot \Sigma \cdot S\}} where l ( w ) {\displaystyle l(w)} is the correct label of w {\displaystyle w} (whether it is in L {\displaystyle L} or not). We may assume that ϵ ∈ S {\displaystyle \epsilon \in S} . ==== Constructing a deterministic automata ==== Given the sample from the adversary W {\displaystyle W} , the construction of the automaton by the inference algorithm I {\displaystyle I} starts with defining P = prefix ( W ) {\displaystyle P={\text{prefix}}(W)} and S = suffix ( W ) {\displaystyle S={\text{suffix}}(W)} , which are the set of prefixes and suffixes of W {\displaystyle W} respectively. Now the algorithm constructs a matrix M {\displaystyle M} where the elements of P {\displaystyle P} function as the rows, ordered by the shortlex order, and the elements of S {\displaystyle S} function as the columns, ordered by the shortlex order. Next, the cells in the matrix are filled in the following manner for prefix p i {\displaystyle p_{i}} and suffix s j {\displaystyle s_{j}} : If p i s j ∈ W → M i j = l ( p i s j ) {\displaystyle p_{i}s_{j}\in W\rightarrow M_{ij}=l(p_{i}s_{j})} else, M i j = 0 {\displaystyle M_{ij}=0} Now, we say row i {\displaystyle i} and t {\displaystyle t} are distinguishable if there exi
Sayre's paradox
Sayre's paradox is a dilemma encountered in the design of automated handwriting recognition systems. A standard statement of the paradox is that a cursively written word cannot be recognized without being segmented and cannot be segmented without being recognized. The paradox was first articulated in a 1973 publication by Kenneth M. Sayre, after whom it was named. == Nature of the problem == It is relatively easy to design automated systems capable of recognizing words inscribed in a printed format. Such words are segmented into letters by the very act of writing them on the page. Given templates matching typical letter shapes in a given language, individual letters can be identified with a high degree of probability. In cases of ambiguity, probable letter sequences can be compared with a selection of properly spelled words in that language (called a lexicon). If necessary, syntactic features of the language can be applied to render a generally accurate identification of the words in question. Printed-character recognition systems of this sort are commonly used in processing standardized government forms, in sorting mail by zip code, and so forth. In cursive writing, however, letters comprising a given word typically flow sequentially without gaps between them. Unlike a sequence of printed letters, cursively connected letters are not segmented in advance. Here is where Sayre's Paradox comes into play. Unless the word is already segmented into letters, template-matching techniques like those described above cannot be applied. That is, segmentation is a prerequisite for word recognition. But there are no reliable techniques for segmenting a word into letters unless the word itself has been identified. Word recognition requires letter segmentation, and letter segmentation requires word recognition. There is no way a cursive writing recognition system employing standard template-matching techniques can do both simultaneously. Advantages to be gained by use of automated cursive writing recognition systems include routing mail with handwritten addresses, reading handwritten bank checks, and automated digitalization of hand-written documents. These are practical incentives for finding ways of circumventing Sayre's Paradox. == Avoiding the paradox == One way of ameliorating the adverse effects of the paradox is to normalize the word inscriptions to be recognized. Normalization amounts to eliminating idiosyncrasies in the penmanship of the writer, such as unusual slope of the letters and unusual slant of the cursive line. This procedure can increase the probability of a correct match with a letter template, resulting in an incremental improvement in the success rate of the system. Since improvement of this sort still depends on accurate segmentation, however, it remains subject to the limitations of Sayre's Paradox. Researchers have come to realize that the only way to circumvent the paradox is by use of procedures that do not rely on accurate segmentation. == Directions of current research == Segmentation is accurate to the extent that it matches distinctions among letters in the actual inscriptions presented to the system for recognition (the input data). This is sometimes referred to as “explicit segmentation”. “Implicit segmentation,” by contrast, is division of the cursive line into more parts than the number of actual letters in the cursive line itself. Processing these “implicit parts” to achieve eventual word identification requires specific statistical procedures involving hidden Markov models (HMM). A Markov model is a statistical representation of a random process, which is to say a process in which future states are independent of states occurring before the present. In such a process, a given state is dependent only on the conditional probability of its following the state immediately before it. An example is a series of outcomes from successive casts of a die. An HMM is a Markov model, individual states of which are not fully known. Conditional probabilities between states are still determinate, but the identities of individual states are not fully disclosed. Recognition proceeds by matching HMMs of words to be recognized with previously prepared HMMs of words in the lexicon. The best match in a given case is taken to indicate the identity of the handwritten word in question. As with systems based on explicit segmentation, automated recognition systems based on implicit segmentation are judged more or less successful according to the percentage of correct identifications they accomplish. Instead of explicit segmentation techniques, most automated handwriting recognition systems today employ implicit segmentation in conjunction with HMM-based matching procedures. The constraints epitomized by Sayre's Paradox are largely responsible for this shift in approach.
Gaussian adaptation
Gaussian adaptation (GA), also called normal or natural adaptation (NA) is an evolutionary algorithm designed for the maximization of manufacturing yield due to statistical deviation of component values of signal processing systems. In short, GA is a stochastic adaptive process where a number of samples of an n-dimensional vector x[xT = (x1, x2, ..., xn)] are taken from a multivariate Gaussian distribution, N(m, M), having mean m and moment matrix M. The samples are tested for fail or pass. The first- and second-order moments of the Gaussian restricted to the pass samples are m and M. The outcome of x as a pass sample is determined by a function s(x), 0 < s(x) < q ≤ 1, such that s(x) is the probability that x will be selected as a pass sample. The average probability of finding pass samples (yield) is P ( m ) = ∫ s ( x ) N ( x − m ) d x {\displaystyle P(m)=\int s(x)N(x-m)\,dx} Then the theorem of GA states: For any s(x) and for any value of P < q, there always exist a Gaussian p. d. f. [ probability density function ] that is adapted for maximum dispersion. The necessary conditions for a local optimum are m = m and M proportional to M. The dual problem is also solved: P is maximized while keeping the dispersion constant (Kjellström, 1991). Proofs of the theorem may be found in the papers by Kjellström, 1970, and Kjellström & Taxén, 1981. Since dispersion is defined as the exponential of entropy/disorder/average information it immediately follows that the theorem is valid also for those concepts. Altogether, this means that Gaussian adaptation may carry out a simultaneous maximisation of yield and average information (without any need for the yield or the average information to be defined as criterion functions). The theorem is valid for all regions of acceptability and all Gaussian distributions. It may be used by cyclic repetition of random variation and selection (like the natural evolution). In every cycle a sufficiently large number of Gaussian distributed points are sampled and tested for membership in the region of acceptability. The centre of gravity of the Gaussian, m, is then moved to the centre of gravity of the approved (selected) points, m. Thus, the process converges to a state of equilibrium fulfilling the theorem. A solution is always approximate because the centre of gravity is always determined for a limited number of points. It was used for the first time in 1969 as a pure optimization algorithm making the regions of acceptability smaller and smaller (in analogy to simulated annealing, Kirkpatrick 1983). Since 1970 it has been used for both ordinary optimization and yield maximization. == Natural evolution and Gaussian adaptation == It has also been compared to the natural evolution of populations of living organisms. In this case s(x) is the probability that the individual having an array x of phenotypes will survive by giving offspring to the next generation; a definition of individual fitness given by Hartl 1981. The yield, P, is replaced by the mean fitness determined as a mean over the set of individuals in a large population. Phenotypes are often Gaussian distributed in a large population and a necessary condition for the natural evolution to be able to fulfill the theorem of Gaussian adaptation, with respect to all Gaussian quantitative characters, is that it may push the centre of gravity of the Gaussian to the centre of gravity of the selected individuals. This may be accomplished by the Hardy–Weinberg law. This is possible because the theorem of Gaussian adaptation is valid for any region of acceptability independent of the structure (Kjellström, 1996). In this case the rules of genetic variation such as crossover, inversion, transposition etcetera may be seen as random number generators for the phenotypes. So, in this sense Gaussian adaptation may be seen as a genetic algorithm. == How to climb a mountain == Mean fitness may be calculated provided that the distribution of parameters and the structure of the landscape is known. The real landscape is not known, but figure below shows a fictitious profile (blue) of a landscape along a line (x) in a room spanned by such parameters. The red curve is the mean based on the red bell curve at the bottom of figure. It is obtained by letting the bell curve slide along the x-axis, calculating the mean at every location. As can be seen, small peaks and pits are smoothed out. Thus, if evolution is started at A with a relatively small variance (the red bell curve), then climbing will take place on the red curve. The process may get stuck for millions of years at B or C, as long as the hollows to the right of these points remain, and the mutation rate is too small. If the mutation rate is sufficiently high, the disorder or variance may increase and the parameter(s) may become distributed like the green bell curve. Then the climbing will take place on the green curve, which is even more smoothed out. Because the hollows to the right of B and C have now disappeared, the process may continue up to the peaks at D. But of course the landscape puts a limit on the disorder or variability. Besides — dependent on the landscape — the process may become very jerky, and if the ratio between the time spent by the process at a local peak and the time of transition to the next peak is very high, it may as well look like a punctuated equilibrium as suggested by Gould (see Ridley). == Computer simulation of Gaussian adaptation == Thus far the theory only considers mean values of continuous distributions corresponding to an infinite number of individuals. In reality however, the number of individuals is always limited, which gives rise to an uncertainty in the estimation of m and M (the moment matrix of the Gaussian). And this may also affect the efficiency of the process. Unfortunately very little is known about this, at least theoretically. The implementation of normal adaptation on a computer is a fairly simple task. The adaptation of m may be done by one sample (individual) at a time, for example m(i + 1) = (1 – a) m(i) + ax where x is a pass sample, and a < 1 a suitable constant so that the inverse of a represents the number of individuals in the population. M may in principle be updated after every step y leading to a feasible point x = m + y according to: M(i + 1) = (1 – 2b) M(i) + 2byyT, where yT is the transpose of y and b << 1 is another suitable constant. In order to guarantee a suitable increase of average information, y should be normally distributed with moment matrix μ2M, where the scalar μ > 1 is used to increase average information (information entropy, disorder, diversity) at a suitable rate. But M will never be used in the calculations. Instead we use the matrix W defined by WWT = M. Thus, we have y = Wg, where g is normally distributed with the moment matrix μU, and U is the unit matrix. W and WT may be updated by the formulas W = (1 – b)W + bygT and WT = (1 – b)WT + bgyT because multiplication gives M = (1 – 2b)M + 2byyT, where terms including b2 have been neglected. Thus, M will be indirectly adapted with good approximation. In practice it will suffice to update W only W(i + 1) = (1 – b)W(i) + bygT. This is the formula used in a simple 2-dimensional model of a brain satisfying the Hebbian rule of associative learning; see the next section (Kjellström, 1996 and 1999). The figure below illustrates the effect of increased average information in a Gaussian p.d.f. used to climb a mountain Crest (the two lines represent the contour line). Both the red and green cluster have equal mean fitness, about 65%, but the green cluster has a much higher average information making the green process much more efficient. The effect of this adaptation is not very salient in a 2-dimensional case, but in a high-dimensional case, the efficiency of the search process may be increased by many orders of magnitude. == The evolution in the brain == In the brain the evolution of DNA-messages is supposed to be replaced by an evolution of signal patterns and the phenotypic landscape is replaced by a mental landscape, the complexity of which will hardly be second to the former. The metaphor with the mental landscape is based on the assumption that certain signal patterns give rise to a better well-being or performance. For instance, the control of a group of muscles leads to a better pronunciation of a word or performance of a piece of music. In this simple model it is assumed that the brain consists of interconnected components that may add, multiply and delay signal values. A nerve cell kernel may add signal values, a synapse may multiply with a constant and An axon may delay values. This is a basis of the theory of digital filters and neural networks consisting of components that may add, multiply and delay signalvalues and also of many brain models, Levine 1991. In the figure below the brain stem is supposed to deliver Gaussian distributed signal patterns. This may be possible since certai